Reflex Photonics is proud to announce that its proprietary MicroClip™ MT ferrule design has proven it can withstand a 1 kg live traffic fiber pull test on a 12-fiber ribbon cable pigtail mated to its LightABLE™ products (40G SR4 and 120G SR12), without any signal performance degradation. This result exceeds by a factor of 2 the requirements of Telecordia GR-468-CORE Fiber Integrity Side Pull Test and confirms the reliability of the Reflex Photonics fiber ribbon interface with the LightABLE™ and its MicroClip™ ferrule. The MicroClip™ is a low-profile, low-mass spring loaded mechanical assembly that offers a rugged optical connection that is resistant for shock and vibration and is suitable for harsh environment. The LightABLE™ products are multichannel opt-electronic interconnects operating at 10 Gbps per lane and offering the following features: small SWaP, operation over a large temperature range (-40 °C to 85 °C) and storage temperature from -57 °C to 125 °C. The LightABLE™ can be surface mounted or plugged on a board, and will support high temperature reflow process and operation with a link budget better than 13 dB. Mr. Jocelyn Lauzon, Product Line Manager at R...